allband version

I have investigated the possibility to build an allband version.

A device Si570 could be used to generate all signals. The CB set can be set to a fixed frequency. A microcontroller, LCD and rotary encoder can be used to control the Si570.

It should be possible to build one for most HF bands. However 28 MHz will be difficult. The Mixer will leak some 27 MHz. A suppression of 40 db is possible but it is hard to accieve. The 28 MHz bandpass filter won't provide enough attenuation.
I think that 24 MHz will be difficult too.

For 14 MHz and higher a preamp between the mixer and the bandfilter may be needed for reception.

Using a Lo signal that is higher than the reception frequency is needed for bands > 10 MHz. LSB and USB will be switched. I better use it for all bands. it will reduce software complexity. An additional advantage is that the Lowpass filters can be used to reduce mirror image reception.